DSC00008

This is the red terminal from the Becker wiring harness that connects to the back of the TP. The red connector contains the steering wheel controls. They won’t work without the red connector attached. This is only a problem when you need pre-amp outputs (yellow connector) because the red and yellow terminals occupy the same space on the back of the TP and we all know that no two objects can occupy the same space at the same time! Not to worry, because a simple modification to the red connector is all that’s needed. Simply cut off the left 1/3 of the red connector (when looking at the back of the TP) using a dremel with a cut-off wheel. It’s OK to cut the red connector this way because only the right half of it has any wires connected to it. Look at photo #9 and see the yellow connector located to the left of the red connector.