DSC00010

This is a photo of the completed wiring harness and you also get a good look at the face plate adapter that is available from Scosche (you can also see the Velcro in the upper corners of the adapter that attaches the wood grain trim panel). The Becker wiring harness is connected to the stock wiring harness; the two antenna adapters are connected; and the Preamp outputs (yellow connector) is visible. The speed sensing GAL wire is connected to the white terminal that is attached to the back of the instrument cluster. Removing the instrument cluster is fairly straight forward. Remove the two trim panels below the cluster (a friction fit, just pry them off). Remove screws on the underside of the top lip of the cluster and remove the screws where the trim panels have been removed and it’s off! Then follow the attached directions for interfacing the GAL wire. The TP is vastly superior to the stock Business CD and this is a recommended modification for those who are seeking sonic nirvana. Good luck fellow 5’ers! Al